Carpets create a pleasant room climate and flood rooms with a cosy atmosphere. They are non-slip and the soft material ensures that we feel particularly comfortable. They also serve as seating when the couch is occupied by family and friends, it is a great play area for children and much more. So, it is no wonder that dust and dirt build-up in the carpet fibres over time. let’s check cleaning methods for different types of carpet.
Regular and thorough carpet/ steam cleaning is important because the carpet lasts as long as possible and looks beautiful. In addition to regular cleaning, it makes sense to give the carpet a thorough cleaning every 6 months. Remember that each carpet material must be cleaned individually, here are cleaning methods for different types of carpet
- Natural fibre carpet: With natural fibres, a distinction is made between vegetable and animal origin.
- Vegetable origin: Carpets of vegetable origin are very popular due to their positive environmental balance. They are renewable raw materials that can be recycled. Materials can be sisal, seaweed, coconut fibres, jute, cotton, hemp.
- Animal origin: The carpets of animal origin i.e. made of silk or wool. Wool carpets regulate the humidity in the air and must therefore not be impregnated, as they can then no longer breathe and the air regulation function is lost. You should not use alkaline cleaners on wool carpets, as these degrease and bleach the carpet.
- Synthetic fibre carpet: Synthetic fibres are much easier to care for and less sensitive than natural fibres. They tolerate more moisture and can therefore also be used outdoors. Synthetic fibre carpets usually consist of the materials polyacrylic, polyester, polypropylene, or viscose.
- Shaggy carpet: This type of carpet is very popular in living areas. However, cleaning is a little more difficult. First, take a coarse comb and brush through the long carpet fibres.
Do you have chewing gum on your carpet and cannot get rid of it? Spotclean Facility Services can help.
General carpet/steam cleaning tips for removing:
- Treat carpet stains immediately, because a fresh stain can be removed more easily and gently than a dried one.
- To make sure that the material can tolerate the cleaner, always test the cleaner on an inconspicuous area first.
- A pile should never get completely wet when cleaning, only slightly damp.
- To avoid mould formation, allow enough time to dry after cleaning.
Basically, when cleaning carpets, it always depends on the fibre length, there are so-called short pile carpets with a length of less than 1.5 cm. These are the most robust and can withstand the most. In a deep-pile carpet, the fibres are between 1.5cm – 5cm, which requires gentle treatment.
The most sensitive variant is the so-called long-pile carpet with a length of over 5 cm. From a fibre length of 1.5 cm, you should clean your carpets gently, without a lot of pressure and, above all, with a smooth brush.
You should now attach a microfiber cloth to your steam cleaner and set the steam strength and amount of steam depending on the type of carpet. We recommend choosing the lowest level first. If you already get some stains away with this, you can use this setting for the entire area, otherwise, you should increase the strength from time to time. Always check the condition of your carpet to avoid damage.
The advantages of a steam cleaner when cleaning carpets
The steam cleaner removes carpet stains in particular, simply and effectively, as these are heated by the steam and then picked up by the attached microfiber cloth. You can use it to clean the surface of the entire carpet, especially carpets with short bevels that are cleaned thoroughly and deep into the fibres.
Mites and other bacteria are also partially killed. This is particularly beneficial for people with allergies.
The steam vacuum cleaner is a better alternative.
If you want to get deeply clean carpets as a result, then the ” steam vacuum cleaner ” is the optimal choice, as it sucks up the dirt directly from the carpet, so that even deeper dirt is easily removed.
Here too, because of the hot steam, you should increase the steam strength slowly and in a controlled manner and check the properties of the carpet in between. In general, however, nothing should happen if you work quickly with the device, as a large part of the water is sucked in again. This also ensures that the fibres and glue stay intact.
Recommendation for the most effective and gentle cleaning methods for different types of carpet
Probably the gentlest and the best cleaning you get with a vacuum cleaner. To explain exactly how these devices, work and what exactly they do, we have put together a step-by-step guide.
Step 1: Preparation
Before the washer-extractor is used, you must vacuum the entire carpet with a vacuum cleaner to achieve a thorough cleaning.
Step 2: Applying the cleaning fluid
A cleaning agent is then mixed with water and sprayed onto the carpet through a nozzle of the device. The water in this device is not heated, which means that it is gentle on sensitive fibres and the adhesive. The process should take place at a distance of 10 cm from the carpet. You should then wait 10 minutes so that the agent can work on the carpet optimally.
Step 3: Familiarisation
Now the applied agent is worked into the carpet with a floor nozzle by pulling it over the carpet. Then the powerful suction function of the washer-extractor is activated to suck in the deep dirt from the carpet. This will pull the rough moisture out of the carpet.
Step 4: Suction with freshwater supply
Finally, you have to activate both the freshwater supply and the suction function and drive it along the entire carpet. This will rinse your carpet again and all the water and remaining dirt will be sucked in in the same operation. Ultimately, you remove mites, bacteria, animal hair, and all kinds of dirt down to the deepest pores.
Step 5: Suction
After the carpet is completely dry again, you should run the vacuum cleaner over it again.
The vacuum cleaner is suitable as a good device for superficial dirt if certain precautions are taken. If you want a more thorough cleaning, you are better off with a steam vacuum cleaner, as this also sucks the dirt out of the fibres.